Biomaterializar: madera de Amomyrtus, una oportunidad para la diversificación productiva sustentable del bosque templado
Abstract
The background information presented in this paper explores a productive alternative for the temperate forest of Chile and Argentina.
References
Allner L., Kroehnert, D., (2019). Natural complexity. An introduction to structural design with tree forks. Digital Wood Design. DOI: 10.1007/978-3-030-03676-8_29
Baber, K., Burry, J., Chen, C., Gattas, J., Bukauskas, A. (2020) Inventory constrained desing of a timber funicular structure. SN Applied Sciences https://doi.org/10.1007/s42452-020-03314-9
Bukauskas, A., Mayencourt, P., Shepherd, P., Sharma, B., Mueller, C., Walker, P., & Bregulla, J. (2019). Whole timber construction: A state of the art review. In Construction and Building Materials (Vol. 213, pp. 748–769). Elsevier Ltd. https://doi.org/10.1016/j.conbuildmat.2019.03.043
Bukauskas, A. (2015). New Structural Systems in Small-Diameter Round Timber. Submitted to the Departament of Architecture in partial fulfillment of de requiriments for the degree of Bachelor of Science in Architecture. MIT June 2015.
Dénou, C., Restrepo, D., Slater, D. (2020). Demystifying Tree Forks: Vices and virtues of forks in arboriculture. Journal of Botany Research. Vol 3. DOI 10.36959/771/566 Dubor Alexandre, Bielicki Filip, Alois Dackiw Jean-Nicolas, Krenmuller aimund, Garivani
Soroush, & Kumarji Sujay. (2019, January 9). BANDSAWN CURVED LUMBER. IaaC Institute for Advanced Architecture of Catalonia. https://www.iaacblog.com/projects/bandsawn-curved-lumber-2/
Garci´a-Alvarado, M. (2016). Intersecciones Deformaciones múltiples. Intersecciones PUC.
Garci´a-Alvarado, M. (2019). Fondef ID 16i 10303 2017-2019.
Geno, J., Goosse, J., van Nimwegen, S., & Latteur, P. (2022). Parametric design and robotic fabrication of whole timber reciprocal structures. Automation in Construction, 138, 104198. https://doi.org/10.1016/J.AUTCON.2022.104198
Hill, C., Kymäläinen, M., & Rautkari, L. (2022). Review of the use of solid wood as an external cladding material in the built environment. Journal of Materials Science, 57(20), 9031-9076.
Kalin Arroyo, M. T., & Humaña, P. (1999). Breeding systems of two endemic rainforest species in southern Chile: Amomyrtus meli (Phil.) Legr. et Kaus.(Myrtaceae) and Luzuriaga polyphylla (Hook.) Macbr.(Philesiaceae).[Sistema reproductivo de dos especies endemicas del bosque lluvioso del sur de.
Mankouche, S., von Bu¨low, P., & Vliet, K. (2018, July 12). Citation: Limb, a Fantastical Take on Timber Construction. 2018 R+D AWARDS. https://www.architectmagazine.com/awards/r-d-awards/citatio-limb-a-fantastical-take-on-timber-construction_o
Mollica, Z. (2016). Tree Fork Truss: An Architecture of Inherent Forms. In Design & Make. https://zacharymolli.ca/project/tree-fork-truss/
Mayo, J. (2015). Solid wood: case studies in mass timber architecture, technology and design. Routledge.
Muller, C. (n.d.). Los ingenieros del MIT construyen estructuras de carga utilizando horquillas para a´rboles en lugar de juntas de acero. Retrieved May 10, 2022, from https://www.dezeen.com/2022/05/05/tree-forks-mit-digital-structures-architecture/
O¨zden, S., Slater, D., & Ennos, R. (2017). Fracture properties of green wood formed within the forks of hazel (Corylus avellana L.). Trees, 31(3), 903–917. https://doi.org/10.1007/s00468-016-1516-0
Rodríguez, R., Matthei, O., Quezada, M. (1983). Flora arbórea de Chile. Ed.Universidad de Concepción, Concepción, Chile.
Soto Figueroa, P. C. (2004). Reproducción vegetativa por estacas en Amomyrtus luma (Luma), Amomyrtus meli (Meli) y Luma apiculata (Arrayán) mediante el uso de plantas jóvenes y adultas.[Tesis].
Los autores/as que publiquen en esta revista ceden los derechos de autor y de publicación a "Cuadernos del Centro de Estudios de Diseño y Comunicación", Aceptando el registro de su trabajo bajo una licencia de atribución de Creative Commons, que permite a terceros utilizar lo publicado siempre que de el crédito pertinente a los autores y a esta revista.
